logo

Home>Products>Other Equipment
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator
  • Rotary Drum Granulator

Rotary Drum Granulator

  • Model:Dia.: 1.4-2.8 m
  • Capacity:5-35 t/h

Raw Materials:

Ceramsite sand, fly ash, clay, sludge, shale expanded aggregate etc, also could used for the fertilizer granulation.

Application:

Ceramic sand industry, ceramsite industry, chemical fertilizer industry, etc.

Introduction

The drum granulator is one kind of granulating equipment which was trough the drum rotation to granulating the mixed material. The drum granulator was widely used in construction material, metallurgy, chemical industry etc.

Working Principle:

The drum granulator was composed by under frame, cylinder, driving device, support & catch roller, coupling shaft etc. The chain wheel drive support & catch roller by reducer at working, the inclined cylinder slow rotating by support & catch roller under the friction force, the mixed material risen through the cylinder wall by friction force and centrifugal force, then rolling down by gravity, it will rolling into a ball by relative movement between the rolling down material and rising material, the balls moving to the low side from high side along cylinder axis when the balls rolling along the circumference, then the final grain discharged at low side.

 

This kind of granulator has several features such as high efficiency, high rate of finished product, simply structure, sturdy and durable, convenient operation and maintenance, etc

Rotary Drum Granulator

Product Advantages

  • 01

     The granulating ratio of the machine is up to 70% . The small part of feeding back material can be granulated again.

  • 02

    The cylinder body adopts rubber plate lining structure which makes it difficult for raw material to agglomerate.

  • 03

    It can remove scars and peel burls automatically.

  • 04

    Temperature measuring point is reserved at bearing base of supporting roller. It is mainly used for automation detection of kiln operation status by insert the measuring device.

Parameter


ModelCylinder ShellMotor Power (kW)Overall Dimensions(mm)

Volume (m³)Rotating Speed (r/min)Slope (° )
Φ1×64.7153.55.56000×1358×2535
Φ1×1511.7653.57.515000×1358×2535
Φ1.2×1516.9653.51515000×1558×2735
Φ1.2×2022.6153.51520000×1558×2735
Φ1.5×1020.9953.51510000×1858×3035
Φ1.5×1424.7353.51514000×1858×3035
Φ1.5×1831.853.518.518000×1858×3035
Φ1.8×1640.693 ~ 53.52216000×2158×3335
Φ1.8×2050.873 ~ 53.52220000×2158×3335
Φ2.0×1650.243 ~ 532216000×3340×3420
Φ2.0×2062.83 ~ 533020000×3340×3420

INQUIRY

Please fill in your requirements for more information and quotation.
You will get a reply within 24 hours. Thanks.

Contact Us