The advantages of gas-fired lime kiln

Gas-fired lime kiln is a calcining equipment for new fuel.

Gas-fired lime kiln is a calcining equipment for new fuel. The general fuel can be flammable green environmental protection fuel such as natural gas, blast furnace gas and liquefied petroleum gas. The gas-fired lime kiln cylinder is perpendicular to the horizontal plane and is a professional limestone calcining equipment. What are the advantages of gas-fired lime kiln?

1.Gas-fired lime kiln saves energy, especially by using blast furnace residual gas and coke oven residual gas, calcium carbide tail gas and other various industrial furnace residual gas, which can turn waste into treasure, and change harm to benefit, which can maximize energy saving.

2. The temperature in the furnace is uniform and the quality of calcined lime is good. Gas fuel can be burned in all the voids of limestone. There is no dead angle. Solid fuel is difficult to achieve. If there is little unevenness in the fabric, the temperature will be high or low. Because the gas burning flame is uniform and simultaneous heat release, and the adjustability is strong. It can achieve rapid combustion and rapid cooling, so the lime activity is good.

3. Good detection, good operation. Because the temperature of the gas kiln and the gas, air flow, and pressure can be detected by the meter, the furnace worker can grasp the furnace condition and adjust the furnace condition according to the test data, unlike the solid fuel, which is not well controlled, even if the furnace is stopped, the furnace is still in the furnace. Continue to burn. The gas kiln has a short adjustment period and the solid fuel kiln has a long adjustment period.

Based on the absorption and reference of the same type of rotary kiln at home and abroad, the new rotary lime kiln developed by the company. It has the characteristics of high raw material utilization rate, complete calcination, uniform quality, good quality, high production capacity, high operation rate, energy saving and environmental protection, easy operation and long life of the whole machine.