PC Series Hammer crusher is called hammer mill. This series of crusher is the first choice of equipment for small sand production line with less investment and fast returns. You can do a selective discharge by change the form of grid bar.
This series of products has the features of small size, light weight, simple structure, easy operation and maintenance, large crushing ratio, small over crushing, uniform product size, high production capacity etc. Suitable for crushing various materials of brittle. medium- hard. compressive strength of l00MPa. It adopts new technology casting and use the big hammer, with wear-resistant, impact resistance. And it can adjust the required size according to customer requirements. while the sealed body structure solves the crushing workshop dust pollution and body leakage problems. It is an upgrading product with advantages of beautiful overall design, compact structure, less wearing parts, easy maintenance. etc.
It has large crushing ratio (normally is 10-25, or up to 50), high production capacity, even particles size, less over crushing phenomenon, simple structure, high weight and easy operation;
It can break material with size of 600-1800mm directly into size of 25mm or below.
The required granularity can be adjusted according to customer requirements.
The overall design has beautiful appearance, compact structure, few wearing parts and convenient maintenance.
Model | Max feed size(mm) | Discharge size(mm) | Rotor speed(r/min) | Capacity(t/h) | Power(kW) | Weight(t) |
---|---|---|---|---|---|---|
PC400x300 | <200 | <25 | 1000 | 8-15 | 11 | 0.8 |
PC500x350 | <200 | <25 | 1000 | 12-20 | 18.5 | 1.2 |
PC600x400 | <250 | <25 | 1200 | 15-30 | 22 | 1.5 |
PC800x600 | <300 | <30 | 1100 | 25-50 | 55 | 3.7 |
PC1000x800 | <300 | <30 | 1000 | 30-65 | 110 | 6.5 |
PC1000x1000 | <300 | <30 | 800 | 45-80 | 132 | 7.59 |
PC1200x1000 | <300 | <30 | 650 | 70-100 | 160 | 12.5 |