Ball Mill

【Model】:

MQZ1224-MQZ3660

【Capacity】:

0.8-230t/h

【Material】:

Dolomite, Ferrosilicon, Fluorite powder
  • Introduction
  • Features
  • Technical Data

Ball Mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scale board. This machine runs steadily and works reliably.

Our company mainly produces five kinds of mill as follows:

1.Wet Grate Rolling Bearing Energy Ball Mill

This series of ball mill is suitable for ore dressing, chemical, coal, cement and tetractpry sectors to operate fine grinding.

Bearing-type drive ball mill is a technological changing type, compared with the traditional ball mill: 15% lower operating current and reduce the starting current 50%, according to Babbitt burning, downtime, the phenomenon of stopping production, not enough to improve the ball concentricity, run instability, current fluctuated,  wear serious phenomenon hollow shaft. While use of rolling bearing, the hollow shaft can continue to use, save 90% lubrication oil, improve the loading of 20%, increase production by 15%, 10% speed increase , each saving at 20%-30% power.    

2.Air Swept Coal Mill

Air swept mill is used for coal grinding in the industrial furnace and rotary kiln requiring the fineness of pulverized coal being 85% for 200 mesh sieve and the water content being less than 2%. Air swept mill is most ideal processing equipment for grinding and drying at the same time.

3. Raw Mill

Raw mill is mainly used in grinding raw materials in cement plant. It is also suitable for various material s and other fields such as metallurgy, mine, chemical and construction. Besides, it has two forms, one is an open form, and the other is a closed circuit form equipped with powder classifier. It is widely applied in many industries and has convenient operation.

It has many advantages such as, strong adaptability, continuous production, large crushing ratio and easy to adjust the size of the products. And it is suitable for both dry production and wet production. It also can allow the milling and drying processing simultaneously.

4.Cement Mill

The finished product has high fineness and large specific surface

Compared with other enterprises in the same industry, the cement produced by our cement mill has the advantage of high fineness and large specific surface. The cement has excellent quality, high hydration reaction speed, fast strength development, and good intensity after hardening.

High efficiency and large output

We have rich experience on the manufacture of cement mill, and our technology take a leading place in the industry. Compared with other products in the same industry, the output increases by 15-20%, power consumption reduces by 10%. Moreover, the temperature of finished product can reduce by 10-20℃.

5. Ball Mill For Metallurgical Ore Dressing

Ball mill organization character:

By feeding department, the exiting material department, the transmission department (speed reducer, small transmission gear, electrical machinery, electric control) and so on main part composes. The midheaven axis uses the steel casting, the inside lining is detachable, rotates the big wheel to use the casting to roll the tooth processing, tube in vivo besets with by the wear-resisting backing, has the good resistance to wear. It revolves steadily, operation reliable.

Ball Mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scale board. This machine runs steadily and works reliably.

OUR ADVANTAGE

1.Liner of ball mill is made of high-quality wear resistant material with high strength, wear resistance and long working life.

2.Product fineness is adjustable, uniform and high qualified.

3.Large capacity and crushing ratio, good sealing performance. It can be adapted to different working conditions.

4.High grinding efficiency, low energy consumption



 

Contact Us

Inquiry
You can get the price list and we will contact you within one business day!
  • Name *

  • Tel

  • Country

  • Company

  • E-mail *

  • Message *

Contact Us

Address:
Qiaoloucaizhai industrial park,XingYang,ZhengZhou,Henan,China

Phone:+86-0371-55902868

Email:ec03@zkcorp.com

Whatsapp:+86 18937185591

wechat:+86 18937185591

Instant Message

You can get the price list and we will contact you within one business day!

Copyright©2015.Company name All rights reserved 豫ICP备11012423号-4