【Model】: Φ1.6x32--Φ4.7x72(m)
【Capacity】: 48-1000(t/d)
【Material】: Dolomite ,limestone and bauxite
Rotary kiln is thermal equipment to heat materials. It is widely used in the fields of cement, nonferrous metallurgy, ferrous metallurgy, refractory material, chemical, and making-paper.
We produces other kilns with the diameter1-5 meters and widely applied in the metallurgy, chemical industry and so on. This kind of kiln’s supporting is divided into two forms of rolls and skids. The transmission may use direct-current or the exchange frequency conversion velocity modulation and has many kinds of form seals to adapt the different operating mode.
We could also meet different needs from different customer to produce non-standard kiln.
1.New type technology is adopted by main driving system. Compared with traditional magnetic and DC speed regulation, its main driving system has the advantages like energy saving, environmental, wide speeding adjusting range, high performance and stable operation.
2.After the welding of bases for supporting devices of supporting roller and catching roller, vibration aging treatment should be applied for remove the welding stress. Then, use vertical lathe and boring-milling machine for integration fabrication. This process can guarantee the requirement of fabrication precision and dimension & location tolerance. Installation accuracy of rotary kiln is obviously improved.
3.Large torque, low energy consumption. As the spiral without shaft, the material is not easy to plug, the discharge port is not blocked, which can be lower speed operation, smooth transmission, reduce energy consumption. The torque can be 4000N / m.
4.Large conveying capacity. The capacity is 1.5 times as the traditional shaft screw conveyor with the same diameter. Long conveying distance and ultra-long distance transport materials. The conveying length can reach 30 meters, which also can be adjusted according to user needs and installed by multi-level series.
|
Model |
Capacity （t/h） |
Speed (rpm) |
Slope (%) |
Support No. |
Gearbox |
Motor model |
Power (kw) |
Remark |
|
Ø1.6×32m |
2 |
0.58-2.85 |
4 |
3 set |
ZQ75-50 |
YCTZ50-4A |
18.5 |
|
|
Ø1.6/1.9×36m |
2.5~3 |
0.53-1.59 |
4 |
3 set |
ZQ110-7 |
YCTZ50-4B |
22 |
|
|
Ø1.9×39m |
3~3.5 |
0.53-1.59 |
4 |
3 set |
ZQ125-7 |
YCT315-4A |
37 |
|
|
Ø2.2×38m |
5~6 |
0.214-1.64 |
3.5 |
3 set |
Main ZS125-5-II |
Main YCT315-4A |
37 |
★ |
|
Auxiliary ZQ40-40 |
Auxiliary Y112M-4 |
4 |
||||||
|
Ø2.2×45m |
4~5 |
0.214-1.64 |
3.5 |
3 set |
Main ZS125-5 |
Main YCT315-4B |
45 |
|
|
Auxiliary ZQ40-40 |
Auxiliary Y112M-4 |
4 |
||||||
|
Ø2.5×40m |
6~7 |
0.62-1.5 |
3.5 |
3 set |
Main ZS165-5 |
Main YCT355-4A |
55 |
★ |
|
Auxiliary ZS50-1 |
Auxiliary Y160M-6 |
7.5 |
||||||
|
Ø2.5×50m |
5~6 |
0.62-1.5 |
3.5 |
3 set |
Main ZS165-5 |
Main YCT355-4A |
55 |
|
|
Auxiliary ZS50-1 |
Auxiliary Y160M-6 |
7.5 |
||||||
|
Ø2.8×43m |
7~8 |
0.62-1.5 |
3.5 |
3 set |
Main ZS165-6 |
Main YCT355-4B |
75 |
★ |
|
Auxiliary ZS50-1 |
Auxiliary Y160L-6 |
11 |
||||||
|
Ø2.8×55m |
6~7 |
0.62-1.5 |
3.5 |
3 set |
Main ZS165-6 |
Main YCT355-4B |
75 |
|
|
Auxiliary ZS50-1 |
Auxiliary Y160L-6 |
11 |
||||||
|
Ø3×50m |
9~10 |
0.5-1.5 |
3.5 |
4 set |
Main ZS165-3 |
Main ZSN-280-11B |
125 |
★ |
|
Auxiliary ZS50-1 |
Auxiliary Y160L-6 |
11 |
||||||
|
Ø3×60m |
7~8 |
0.5-1.5 |
3.5 |
4 set |
Main ZS165-3 |
Main ZSN-280-11B |
125 |
|
|
Auxiliary ZS50-1 |
Auxiliary Y160L-6 |
11 |
||||||
|
Ø3.2×53m |
10~12 |
0.4-1.5 |
3.5 |
3 set |
Main ZL130-16 |
Main ZSN4-280-11B |
125 |
★ |
|
Auxiliary ZL50-10 |
Auxiliary Y180L-4 |
22 |
||||||
|
Ø3.2×64m |
8~10 |
0.4-1.5 |
3.5 |
3 set |
Main NZS995-28VBR |
Main ZSN4-280-21B |
160 |
|
|
Auxiliary ZL50-9-2 |
Auxiliary Y180L-6 |
15 |
||||||
|
Ø3.5×70m |
12~14 |
0.4-1.5 |
3.5 |
3 set |
Main ZSY500-40 |
Main ZSN-315-072 |
250 |
|
|
Auxiliary ZSY180-31.5 |
Auxiliary Y180L-4 |
22 |
||||||
|
Ø3.6×55m |
14~16 |
0.4-1.5 |
3.5 |
3 set |
Main ZSY500-40 |
Main ZSYN-315-072 |
250 |
★ |
|
Auxiliary ZL65-16 |
Auxiliary Y180L-4 |
22 |
||||||
|
Ø3.8×58m |
18~20 |
0.4-1.5 |
3.5 |
3 set |
Main ZSY500-40 |
Main ZSN315-072 |
250 |
★ |
|
Auxiliary ZL50-14 |
Auxiliary Y180L-4 |
22 |
||||||
|
Ø4.0×60m |
104 |
0.4-1.5 |
3.5 |
3 set |
Main ZSY630-35.5 |
Main ZSN4-355-092 |
315 |
★ |
|
Auxiliary ZL65-16 |
Auxiliary Y200L-4 |
30 |
Remark：According to the requirement, the kiln length and driving system can be revised.
★ means the rotary kiln match with vertical pre-heater
Main spare parts is 1, sealing plate, 2. Oil sealing, 3. Nylon pin 4, Rubber block 5, Kiln head back plate.
