Common Dust Removal Method for Sand Production Line

Usually we pay more attention to the maintenance of the sand production line. What are the dust removal methods commonly used in the maintenance of the sand production line?

Usually we pay more attention to the maintenance of the sand production line. What are the dust removal methods commonly used in the maintenance of the sand production line? In the sandproduction line production process, the more common pollution is dustpollution. Dust not only causes pollution to the environment, but also hasgreat harm to human health. Therefore, effective measures must be taken toreduce pollution. With regard to dust removal methods commonly used in themaintenance of sand production lines, ZK CORP has summarized the followingthree commonly used methods.

1. Crusher dust removal: Dust removal can becarried out by means of closed dust source ventilation and dust removal. Thismethod has a simple process, a high degree of mechanization, and can becontrolled at a long distance, thereby reducing the chance of the workerstouching the dust.

2. Perforation, shoveling operations dust:Used to reduce the dust pollution of stone mining process. Perforationoperations are mainly performed in wet operation, and large rock drills canalso be dust-removed using a dust catcher. Dust generated by shoveling ore rockcan be dusted by spraying water and dust.

3. Transport dust removal: Dust from vehiclesduring open-air mine transportation is the main dust source of open-pit mines.Transportation dust removal measures mainly include spraying water on the rockbefore loading, setting up spray equipment at the unloading site, strengtheningroad surface maintenance, reducing the concentration of roads during thetransportation of vehicles, using asphalt or concrete pavement for the maintransportation roads, and using mechanical watering vehicles. Water is oftensprayed on the pavement, or wetting agents are added to the water to improvethe dust protection. Water can also be sprayed with dust suppression agent toreduce dust. The main components of dust suppression agent are moisture absorptionagent and polymer adhesive, which can absorb moisture to form a dust-prooflayer and improve road surface quality.

The above methods are very effective afterthe customer's reaction. After the above dust prevention measures are taken, inmost cases, the dust concentration can reach the standard, but there will stillbe a small amount of fine dust suspended in the air, so the staff must weardust masks. This is an indispensable measure in comprehensive dust preventionmeasures.